Body
Find out which multi-factor authentication (MFA) methods you can use with your University of Maine System (UMS) account, which ones are recommended, and which are not allowed.
WARNING: You must set up the Microsoft Authenticator app before you can add any passkey, because adding a passkey requires you to sign in with MFA first. If you do not have a smartphone,
call or visit the IT Service Desk to set up your first sign-in method. This is a temporary workaround. Microsoft is planning an update that will let you add a passkey as your first MFA method on your own, without needing to contact the IT Service Desk.
Table of Contents
- Detailed Information
- What is an "authentication method"?
- Why you might be prompted for a specific method
- MFA method explanations
- Recommendations
- Methods that are not allowed
- All available methods at a glance
- Environment
Authentication methods define how users can verify their identity in Microsoft Entra. Traditionally this meant MFA methods “in addition to the password”, but today several methods can also replace the password entirely (for example, passkeys and Windows Hello). In other words, authentication methods control what options users have available when signing in or performing MFA.
INFO: UMS sign-in is set up to automatically ask for your strongest registered method first. If you have a passkey registered, you will be prompted for it instead of your password. If more than one method is registered to your account, you can always select Sign in another way at the sign-in screen to choose a different one.
If you have registered more than one method, here is the order UMS will ask for them, strongest first:
- Passkey (including Windows Hello)
- Microsoft Authenticator app (push notification)
- External MFA (if you previously enrolled in Duo; this is not available to all users)
- Software OATH token (not recommended, see below)
If you just added a new sign-in method, it may take a sign-in or two before UMS begins offering it automatically. This is expected; give it a little time before contacting the IT Service Desk.
Setup instructions for each method are in the How-To Guides collection.
Passkeys are the preferred MFA method at UMS because they are phishing-resistant. They cannot be stolen through fake sign-in pages, reused, or leaked in data breaches. When you use a passkey, you verify your identity with biometrics (fingerprint or face recognition) or a PIN on your device. You do not need to enter your password separately.
There are two types of passkeys:
Device-bound passkeys are stored on one specific device (such as your phone or a YubiKey) and cannot be copied elsewhere. They are the most secure option.
Available options:
- Passkey in Microsoft Authenticator (Android or iPhone/iPad): Stored inside the Microsoft Authenticator app on your phone. You approve sign-ins with your phone's fingerprint, face recognition, or PIN. You can also use it to sign in on a computer by scanning a QR code with your phone.
- Windows Hello: Built into Windows computers. Stored on that one computer and uses your computer's PIN, fingerprint, or face recognition to sign in.
- Hardware Security Key (FIDO2) (Windows or macOS): A YubiKey is a small physical key that plugs into a USB port or taps via NFC. It is phishing-resistant and does not require a smartphone. Students who need a hardware security key must purchase their own. See MFA Without a Smartphone: Your Options for recommended models.
Syncable passkeys are backed up to a cloud account (such as iCloud or Google) and are automatically available on any device you sign in to with that account. They are very convenient and still phishing-resistant, though their security depends on the security of your personal account.
Available options:
- Google Password Manager (Chrome): Saved to your Google account and available in Chrome on any device where you're signed in with that Google account, including Android phones.
- iCloud Keychain (iPhone/iPad or Mac): Saved to your Apple account and available on your iPhone, iPad, and Mac when iCloud Passwords sync is turned on. You sign in with Face ID, Touch ID, or your device passcode or Mac password.
Microsoft Authenticator is a free app for iOS and Android. It provides MFA through push notifications with number matching. When you sign in, a number appears on the screen. You open the app and enter the same number to approve the sign-in. This is the minimum requirement; once the app is set up, you can add a passkey inside it for a better experience.
Setup guides:
See Microsoft's support page for current device requirements (External Link).
DANGER: Third-party authenticator apps are the least secure MFA method allowed at UMS and should only be used as an absolute last resort. Use this option only if all of the following are true: your phone does not meet the Microsoft Authenticator app's requirements, a hardware security key is not available to you, and no other method on this page is an option. OATH-TOTP codes are not phishing-resistant. Unlike a passkey or hardware security key, a code can be captured and reused if you are tricked into entering it on a fake sign-in page.
If you have a computer but no smartphone, or a phone that does not meet the Microsoft Authenticator app's requirements, Microsoft Entra ID accepts verification codes from third-party apps that support the OATH-TOTP standard, the same standard used to generate 6-digit rotating codes. See MFA Without a Smartphone: Your Options for setup guidance.
Minimum requirement: Microsoft Authenticator app. Set this up first. It is the minimum requirement for MFA methods.
Students and users on personal devices should set up MFA in the following order. Each step improves the experience:
- Microsoft Authenticator app (minimum requirement): set this up first. It is required before you can add a passkey in the app.
- Passkey in the Authenticator app (device-bound): the simplest passkey to set up. Stored on your phone; does not sync to other devices.
- Syncable passkey via iCloud Keychain or Google Password Manager (best day-to-day experience): automatically available on all your personal devices. Set this up on every personal device you use regularly.
WARNING: Do not save a passkey on someone else's computer or a shared computer. Passkeys are personal. Saving one on a shared machine means others could potentially sign in as you.
WARNING: Do not register or save a passkey on a lab or shared computer.
To sign in on a lab computer, use one of these approaches:
- Passkey via QR code: the sign-in screen shows a QR code. Scan it with your phone to complete authentication using the passkey on your phone. This requires Bluetooth to be enabled on the lab computer.
- Microsoft Authenticator push notification: if Bluetooth is not available on the lab computer, use the Authenticator app on your phone to approve a push notification instead.
The following methods are not available for MFA at UMS:
- SMS text message: not secure enough; vulnerable to SIM-swapping attacks.
- Voice phone call: not secure enough.
- Email one-time password: not secure enough.
| Method |
Phishing-resistant? |
Requires smartphone? |
Supported by UMS IT? |
Recommended? |
| Windows Hello (passkey on Windows) |
✅ Yes |
❌ No |
✅ Yes |
✅ Yes, Windows computers. Windows Hello must be set up first (External Link) |
| FIDO2 Security Key (YubiKey) (Windows or macOS) |
✅ Yes |
❌ No |
✅ Yes |
✅ Yes, if no smartphone available |
| Passkey in Microsoft Authenticator app (Android or iPhone/iPad) |
✅ Yes |
✅ Yes |
✅ Yes |
✅ Yes, personal devices, students |
| iCloud Keychain (synced passkey) (iPhone/iPad or Mac) |
✅ Yes |
❌ No, any Apple device signed in to iCloud (iPhone, iPad, Mac) |
✅ Yes |
✅ Yes, Mac, personal Apple devices |
| Google Password Manager (synced passkey) |
✅ Yes |
❌ No, any device signed in to Google |
✅ Yes |
✅ Yes, Android and other Google-signed-in devices |
| Third-party password managers (Bitwarden, 1Password, etc.) |
✅ Yes |
⚠️ Depends on manager |
❌ No, allowed but not supported |
✅ Allowed; contact vendor for support |
| Microsoft Authenticator app (push notification) (Android or iPhone/iPad) |
❌ No (number matching helps) |
✅ Yes |
✅ Yes |
✅ Minimum acceptable option |
| Third-party authenticator app (OATH-TOTP) |
❌ No |
❌ No, works on a computer if the app has a desktop version |
❌ No, allowed but not supported |
⚠️ Last resort only (see warning above) |
| SMS, voice, or email one-time password |
❌ No |
❌ N/A |
❌ N/A |
❌ Not allowed |
- Microsoft Entra
- Windows, macOS, Linux, iOS, Android
- FIDO2-compatible browsers and devices